A radiation free alternative to CBCT volumetric rendering for soft tissue evaluation / Um método alternativo à TCFC sem radiação ionizante para a avaliação de tecidos moles da face

Objective: The aim of the present study is to evaluate whether a "radiation free" method using 3D facial scan can replace Cone Beam Computed Tomography (CBCT) volumetric rendering of soft tissue of the patient to assess maxillofacial surgery outcomes and compare the reference points and angular measurements of patient facial soft tissue. Material and Methods: Facial soft tissue scan of the patient's face, before and after orthognathic surgery and a CBCT of the skull for volumetric rendering of soft tissues were carried out. The 3D acquisitions were processed using Planmeca ProMax 3D ProFace® software (Planmeca USA, Inc.; Roselle, Illinois, USA). The participant were positioned in a natural position during the skull scannering. Three sagittal angular measurements were performed (Tr-NA, Tr-N-Pg, Ss-N-Pg) and two verticals (Go-N-Me, Tr-Or-Pg) on facial soft tissue scan and on the patient's 3D soft tissue CBCT volumetric rendering. Results: A certain correspondence has been demonstrated between the measurements obtained on the Proface and those on the CBCT. Conclusion: A radiation free method was to be considered an important diagnostic tool that works in conditions of not subjecting the patient to harmful ionizing radiation and it was therefore particularly suitable for growing subjects. The soft tissue analysis based on the realistic facial scan has shown sufficient reliability and reproducibility even if further studies are needed to confirm the research result.(AU)

Objetivo:Avaliar se um método "livre de radiação" usando escaneamento facial 3D pode substituir a renderização volumétrica da tomografia computadorizada de feixe cônico (TCFC) dos tecidos moles do paciente para analisar os resultados da cirurgia maxilofacial e comparar os pontos de referência e medições angulares afim de avaliar a correspondência entre as duas metodologias. Material e Métodos: Foi realizado o escaneamento dos tecidos moles faciais do paciente, antes e depois da cirurgia ortognática e uma tomografia computadorizada de feixe cônico do crânio para renderização volumétrica dos tecidos moles. As aquisições 3D foram processadas usando o software Planmeca ProMax 3D ProFace® (Planmeca USA, Inc.; Roselle, Illinois, USA). O participante foi posicionado em posição natural durante o escaneamento do crânio. Três medições angulares sagitais foram realizadas (Tr-NA, Tr-N-Pg, Ss-N-Pg) e duas verticais (Go-N-Me, Tr-Or-Pg) nas imagens de scaneamento e nas imagens do tecido mole facial da reconstrução tridimensional da TCFC. Resultados: Uma certa correspondência foi demonstrada entre as medidas obtidas no Proface® e aquelas na TCFC. Conclusão: Um método livre de radiação deve ser considerado uma importante ferramenta de diagnóstico que funciona em condições de não submeter o paciente a radiação ionizante nociva e, portanto, é particularmente adequado para indivíduos em crescimento. A análise de tecidos moles com base na varredura facial realista mostrou confiabilidade e reprodutibilidade, porém mais estudos são necessários para confirmar o resultado da pesquisa. (AU)

Clinical Use of Aligners Associated with Nuvola® OP System for Transverse Maxillary Deficiency: A Retrospective Study on 100 Patients.

Introduction: Aligners represent a common treatment for orthodontic patients thanks to their countless advantages including aesthetics, comfort, and oral hygiene maintenance; at the same time, they are associated with a reduced number of visits and a low incidence of complications. Although aligners have undergone considerable improvements over time, to date they have limitations in resolving the most serious malocclusions related to transverse maxillary deficiency. The aim of the present study was to retrospectively evaluate an orthodontic protocol (the Nuvola® OP System) which associates a morpho-functional corrector (to be used for 30 min/day) with the aligner, allowing for the treatment of cases that would be difficult or unpredictable with aligners alone. Methods: Linear measurements were taken on STL files of 100 patients. In 77 patients between 18 and 55 years (mean 28.6 ± 16.2 (standard deviation) years), 3D superimpositions of the maxilla obtained from intraoral scans before and after treatment were performed in order to evaluate the degree of maxillary expansion. The normality of the data distribution was tested. The pre- and post-treatment data were compared using a paired t-test with a 5% significance level. After treatment, a questionnaire was proposed to assess patients' degree of satisfaction and compliance. Results: A statistically significant difference (p < 0.05) for each distance evaluated was found. The maximum expansion was obtained at the first molar level (2.35 ± 1.64 mm). Of the subjects who completed the questionnaire, 96% were satisfied and 90% were able to perform the protocol without difficulty for the required duration. Conclusions: A significant expansion of the maxillary arch as well as a high degree of patient satisfaction and compliance were observed with the Nuvola® OP System. Further studies are needed in order to clinically evaluate the relative contribution of the aligners and morpho-functional device to the obtained expansion.

Total Face Approach (TFA) 3D Cephalometry and Superimposition in Orthognathic Surgery: Evaluation of the Vertical Dimensions in a Consecutive Series.

BACKGROUND: Cephalometry is fundamental in diagnosis, analysis, and planning of orthodontic-surgical treatment as it reveals skeletal relationship between the upper and lower jaw as well as facial aesthetic parameters. Nevertheless, 3D cephalometry has still not become the exam of choice in orthognathic treatment even though today CBCT (Cone Beam Computed Tomography) is routinely used in other branches of dentistry. METHODS: In a sample of 13 patients undergoing bimaxillary orthognathic surgery a chin-vertex CBCT exam was prescribed prior to orthodontic treatment (OT) and 12 months after surgery (T1). The DICOM files uploaded to MaterialiseSimplant Ortho software pro 2.1 (Materialise Co., Leuven, Belgium) were analyzed following the multiplane 3D Total Face cephalometry protocol (TFA). RESULTS: Results comparing pre-op and post-op TFA 3D cephalometry, were then evaluated considering reference values reported in literature. The CBCT, carried out pre- and post-surgery, were subsequently analyzed employing the superimposition method using cranial base as reference. The aim of this study is to evaluate the advantages and disadvantages of the two methods in orthognathic surgery. CONCLUSIONS: Multiplane 3D TFA allows the clinician to locate where major or minor skeletal discrepancies are found with respect to ideal parameters and is also useful in classifying skeletal intermaxillary relation. The superimposition method is highly intuitive but does not provide information on the quantity and location of osteotomic movement.

Total Face Approach (TFA): A Novel 3D Approach to Describe the Main Cephalometric Craniomaxillofacial Parameters.

The aim of this study is to propose a 3D skeletal classification and relative normal values of reference. Method: from a pool of 271 cone-beam computerized tomography images 108 chin-summit examinations of the skull were selected and divided into 3 traditional skeletal classes. The same Cone-beam Computerized Tomography (CBCT) images were then assessed using the cephalometric multiplanar analysis following the total face approach protocol. Results: the results of this study indicate standard 3D cephalometric norms for the vertical and sagittal evaluation of the skull. Conclusion: data obtained from our measurements allowed the creation of intervals supplying nosological classification that could be used in orthodontics, orthognatic surgery and implant surgery in fully edentulous patients.

One-Stage Computer-Guided Customized Management of Skeletal Asymmetry by Concomitant Proportional Condylectomy and Orthognathic Surgery in Patients With Unilateral Condylar Hyperplasia.

PURPOSE: Facial asymmetry associated with unilateral condylar hyperplasia can benefit from condylectomy, which aims to arrest the pathologic condylar growth and restore an appropriate posterior height. However, there are several cases in which condylar hyperplasia is combined with various dentofacial deformities, for which joint surgery has to be accompanied by concomitant orthognathic surgery. The literature is relatively poor of examples in which virtual planning for orthognathic surgery includes the evaluation of condylectomy, which is often manually performed. The aim of this study was to present and discuss a workflow for 1-stage computer-guided customized management of skeletal asymmetry by simultaneous condylectomy and orthognathic surgery. MATERIALS AND METHODS: Five patients were enrolled in this study from 2018 to 2019. All patients underwent combined virtual planning of orthognathic surgery and condylectomy. Virtual surgery was translated into real surgical coordinates using patient-specific surgical guides and custom-designed osteosynthesis plates. RESULTS: All surgical procedures were uneventful, and in all patients, virtual planning was successfully brought into the operating room with high accuracy, as confirmed by superimposition analyses. Symmetrization of the face and achievement of correct occlusion were observed in all cases. CONCLUSIONS: The presented protocol is a reliable solution for the combined planning of orthognathic surgery and condylectomy. Virtual planning, surgical guides, and custom-designed plates allow computerized simulations to be replicated in the real patient.